Join Telegram

Join Now

Realme C20 RMX3061 Flash File: Unlocking Your Phone

Realme C20 RMX3061 Flash may be used for repair, hang on the emblem, and eliminate all screen locks.  This document will remove all types of display locks such as Pattern and FRP following flash. 

Always use the newest flash file to flash the Realme C20 check apparatus version by dial code #899# in the emergency dial.  Download the document together with the direct download link below and read all flashing instructions before flashing the smartphone.

In order to fix the lock screens on your new Realme C20, you first need to flash it. This document will remove all types of display locks such as Pattern and FRP following a successful operation with flashing tools. 

Always use the newest version for flashing so that there are no problems arising from mismatched versions in case anything goes wrong while unlocking or fixing some other problem either during installation or after completion (e.g., if device is not booting).

Download this file along with links below and read instructions carefully before proceeding any further!

Impotent Note: When you run the flash tool on your computer, it will ask you to log in. Since the device required login credentials, then it can be flash.

How to flash Realme C20 RMX3061 with DownloadTool:

  • Open the firmware folder that includes the download application contained 
  • Before using DownloadTool, make sure your PC / laptop is connected to the online network and must get an auth identification to log in so you can conduct this DownloadTool.
  • Click Start all, turn off the device, link to the PC utilizing the USB cable, then press on the boot (Volume up and Down) simultaneously.
  • Following that, the flashing process will operate; you will see a blue, red, green, and end in a yellow bar which suggests the setup procedure is in progress.
  • If all of the rooting procedure is complete 100%.  Then you will see on-screen the green bar is full. And the device will reboot automatically.
  • Wait until the boot process is complete.  Usually, this procedure takes about 15 minutes, and the apparatus adapts to the installed ROM.

How To Set Up The OTA Firmware:

  • Make Sure That the battery power is minimal 50% before updating the firmware
  • Copy the .ozip file to the SD card, insert the SD card in your device, and then switch off the Mobile.
  • Press and hold the Power button and Volume Down button until the phone reaches Recovery Mode.
  • Under Recovery Mode, click [Install from storage device]> [Install from SD], select the .ozip file.
  • Click on firmware.  A confirmation message will appear on your display.  Click Yes.  Your device will reboot and start updating.  End 

Realme C20 Firmware File Details:

  • Device : Realme C20 RMX3061
  • ROM Type: Stock ROM/ Flash Files/Ota Firmware
  • Processor: MediaTek Helio G35
  • Android Version: Android v10 (Q)
  • Size : 5.9GB
👉 WARNING 👈 Firmware-file.in doesn't recommend using the firmware here, unless you're prepared for all the risks that result from errors when using the firmware/flash file/Stock Rom.

Download Stock ROM /Ofp Firmware /Flash File

  • Realme Flash Tool
  • Realme Driver Setup
  • Ofp Firmware RMX3061PU_11_A.17_210104_dbadb56a.zip
  • Download Link of Flash File For Realme C20 : LINK 1 , LINK 2 , LINK 3
Please Share:

Leave a Comment